HP6000-380-220 New Energy Vehicle High-Voltage Inverter
Model: Maili HP6000-380-220 — a 6000W pure sine wave inverter designed for new energy vehicles, converting the high-voltage DC power (DC380V, DC500V customizable) of the traction battery into stable 220VAC mains power.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | Maili HP6000-380-220 (New Energy Vehicle High-Voltage Inverter) |
| Output Power | 6000W |
| Peak Power | 8000W (within 5 ms) |
| Rated Input Voltage | DC 380V (input range DC 300–440V; DC 500V customizable) |
| Output Voltage | 220VAC ± 5% |
| Output Frequency | 50Hz ± 1% / 60Hz ± 1% |
| Output Waveform | Pure sine wave |
| Waveform Distortion | THD < 3% |
| Output Efficiency | > 94% |
| No-Load Consumption | < 20W |
| Under-Voltage Alarm (no load) | 294V ± 8V |
| Under-Voltage Protection (no load) | 280V ± 8V |
| Under-Voltage Recovery (no load) | 350V ± 8V |
| Over-Voltage Alarm / Fault | 460V ± 8V |
| Over-Voltage Recovery (no load) | 425V ± 8V |
| Over-Temperature | Heatsink temperature ≥ 70°C: output shut down |
| Overload Protection | >105%–120%: protection after 15 s; >120%: protection after 1 s |
| Protection Behavior | Under voltage: red LED + buzzer, auto recovery; Over voltage: red LED, auto recovery; Overload: red LED, auto shutdown (restart required); Over temperature: red LED, auto recovery; Short circuit: 1s auto recovery, then auto shutdown (restart required); Reverse polarity: unit does not operate |
| Operating Temperature | -10°C ~ +50°C |
| Storage Temperature | -30°C ~ +70°C |
| Humidity | 20% ~ 75% RH, non-condensing |
| Operating Altitude | ≤ 1200 m |
| Dimensions (mm) | 440.4 × 174 × 105.5 (with high-voltage connector); 339 × 174 × 105.5 (bare unit) |
Powering a Special Vehicle Project?
Contact us for customized high-voltage inverter solutions for new energy vehicles.
Contact Us